Engine Driven
ENGINE DRIVEN 4 AND 5-STAGE HIGH-PRESSURE BREATHING AIR COMPRESSORS
The ENGINE DRIVEN compressor for recharging SCBA or SCUBA cylinders combines compressor, purification system, and engine drive. The frame’s rugged design is specific to the requirements of the engine drive/compressor block assembly.
ENGINE DRIVEN H25-D
Specifications
Pressure
Up to 6000 PSIG (414 BAR)
Charging rate
8.4 to 9.7 SCFM (170 to 275 L/MIN)
POWER
6.4 to 13.5 HP (4.7 to 10 kW)
STANDARD SCOPE OF SUPPLY
-
BAUER breathing air purification system with B-SECURUS
-
BAUER PLC base controller with four line text display
-
NEMA 4 rated electrical enclosure with hourmeter
Compressor low oil pressure and high temperature safety shutdowns -
Emergency stop push button
-
Automatic condensate drain system with non-corrosive condensate reservoir and integrated float sensor and automatic “Full” indication and compressor shutdown
-
Interstage pressure gauges
-
Electric start package including electric clutch and speed control solenoid
-
Closed loop water-cooled diesel
Available Accessories
(FACTORY INSTALLED)
- BAUER Gas-Tek™ CO monitoring system
- H2S monitoring system
SYSTEM FOOTPRINT
H13-K26:
DIMENSIONS L X W X H inches (mm)
- 63” x 49” x 46” (1600mm x 1245mm x 1168mm)
WEIGHT pounds (kg)
- 300 – 3750 lb (590 – 1700 kg)
H35-K42:
DIMENSIONS L X W X H inches (mm)
- 95” x 52” x 49” (2413mm x 1320mm x 1245mm)
WEIGHT pounds (kg)
- 1300 – 3750 lb (590 – 1700 kg
K60:
DIMENSIONS L X W X H inches (mm)
- 112” x 52” x 53” (2845mm x 1346mm x 1320mm)
WEIGHT pounds (kg)
- 1300 – 3750 lb (590 – 1700 kg)