VERTICUS®
3, 4 AND 5-STAGE ENCLOSED HIGH PRESSURE BREATHING AIR COMPRESSORS
The days of “Breadbox” designed compressor packages are over! Step up to the BAUER VERTICUS®. The updated sound attenuated cabinet is equipped with a unique aesthetically pleasing horizontally hinged, and gas shock supported, operations panel, assuring direct and easy access to the drive belts. Vertically hinged and lift-off side maintenance access doors incorporating fast pin technology make removal of the doors a snap – no hand tools are required! The rear panel incorporates integral handles and tabbed lift off design. The front vertically hinged access door is affixed with a hex keyed latch to eliminate the accidental opening of the door while the system is operating. Sound attenuation has been incorporated on every possible panel to provide a nice and quiet operating level of approximately 72 dB (within one-meter). One package size accommodates BAUER high pressure aircooled compressors from 5 to 20 Hp motors. Our new, larger, 7” HMI enhances monitoring of system functions.
Specifications
Pressure
Up to 6000 PSIG (414 BAR)
Charging rate
5 to 13 SCFM (142 to 368 L/MIN)
POWER
5 to 10 HP (3.7 to 7.5 kW)
STANDARD SCOPE OF SUPPLY
-
BAUER breathing air purification system with B-SECURUS
-
BAUER PLC based controller with 7” color HMI touchscreen display
-
NEMA 4 rated electrical enclosure with UL® listed control panel
-
Compressor low oil pressure and high temperature safety shutdowns
-
Emergency stop push button and automatic start/stop control
-
Zero loss automatic condensate drain system with non-corrosive condensate reservoir and integrated float sensor and automatic “Full” indication and compressor shutdown
-
Interstage pressure gauges (locally mounted)
-
Vertically hinged front operations panel and lift-off side maintenance access doors
-
Inlet filter maintenance indicator
-
Unique hinged front operations panel
Available Accessories
(FACTORY INSTALLED)
- CO monitoring system
- B-Kool (floor mount only)
- H2S monitoring system with audible alarm
SYSTEM FOOTPRINT
VERTICUS:
VAC5 – VAC26
DIMENSIONS L X W X H inches (mm)
- 55” x 35” x 70” (1397mm x 737mm x 1778mm
WEIGHT pounds (kg)
- 1000 – 1400 lb (453.6 – 635 kg)
Technical Data
VERTICUS™ PLUS
3 AND 4-STAGE MULTI-FUNCTIONAL HIGH PRESSURE BREATHING AIR COMPRESSORS
The same package amenities found in the VERTICUS™ high pressure breathing air compressor system, plus a free standing aesthetically pleasing Multi-functional fill station module are combined to create the BAUER VERTICUS™ PLUS. Bauer’s performance proven CFS5.5-2S NFPA compliant containment fill station; two (2) bank dual function cascade controls; integral air storage rack with two (2) UN code air storage cylinders; 3-way selector valve to select either air from the compressor or on-board air storage system all come together creating the ultimate fill station. Install the two (2) modules side by side as an All-In-One configuration or apart based on the installation site specifics. Flexibility is the key, look to BAUER to unlock the possibilities.
Specifications
STANDARD SCOPE OF SUPPLY – COMPRESSOR MODULE
-
BAUER breathing air purification system with SECURUS
-
BAUER PLC based controller with 7” color HMI touchscreen display
-
NEMA 4 rated electrical enclosure with UL® listed control panel
-
Compressor low oil pressure and high temperature safety shutdowns
-
Emergency stop push button and automatic start/stop control
-
Zero loss automatic condensate drain system with non-corrosiveVcondensate reservoir and integrated float sensor and automatic “Full” indication and compressor shutdown
-
Interstage pressure gauges (locally mounted)
Vertically hinged front operations panel and lift-off side maintenance access doors -
Inlet filter maintenance indicator
-
Unique hinged front operations panel
STANDARD SCOPE OF SUPPLY – FILL STATION MODULE
- Dual function cascade controls
- Two (2) UN code stamped air cylinders installed in an integral rack
- 3-way selector valve
- NFPA 1901 2016 edition compliant 2 position containment fill station accommodates SCBA or SCUBA cylinders up to 31” overall length
- Aesthetically pleasing cabinetry
- Will work with any brand compressor
- Packaged together
Available Accessories
(FACTORY INSTALLED)
COMPRESSOR MODULE:
- CO monitoring system
- B-Kool (floor mount only)
- H2S monitoring system with audible alarm
FILL STATION MODULE:
- Regulated (adjustable) remote fill hose connection to include high pressure hose reel and 100 ft of 6000 PSIG rated high pressure hose (wall mount)
- ASME air storage cylinders in lieu of standard UN bottles
- Regulated (adjustable) panel mounted remote fill hose connection
- Dual Fill/2 position
- Tri Fill/2 position
SYSTEM FOOTPRINT
VERTICUS COMPRESSOR MODULE:
DIMENSIONS L X W X H inches (mm)
- 55” x 35” x 70” (1397mm x 737mm x 1778mm)
FILL STATION MODULE:
DIMENSIONS L X W X H inches (mm)
- 35” x 37” x 70” (737mm x 940mm x 1778mm)
WEIGHT pounds (kg)
- 1200 – 1600 lb (544 – 726 kg)